Results for "PROFIS Engineering"

Rigid base plate is a theoretical approach. In real-life no member is fully rigid - if you load it enough the base plate will deform. “Close to rigid” base plates behave similar than rigid base plates...

The new Eurocode 2 Part 4 (EN 1992-4) for the design of fastenings for use in concrete has already been published in many EU countries. The long-awaited introduction of the standard, which sees anchor...

CBFEM method combines advantages of general Finite Element Method (FEM) and Component Method (CM) mentioned in EN1993-1-8 [1]. The stresses and internal forces derived from the CBFEM model are used in...

Since the mid-1970s, adhesive anchors have been used extensively in construction. Today, most projects require the installation of concrete-to-concrete or steel-to-concrete fixtures, which are often s...

FEM is a general method commonly used for structural analysis. Usage of FEM for modeling of connections of any shapes seems to be ideal (Virdi 1999 ). An elastic- plastic analysis is required, as the...

Every structure needs to be connected to the ground via a foundation. These foundations are in most cases made from concrete. To transfer the loads acting on the structure a connection of the structur...

Post-installed reinforcing bars are being used in different applications at jobsites. During design phase, structural engineers usually care about identifying all structural loads, ensuring a safe des...

What is PROFIS Engineering Suite? PROFIS Engineering Suite is the new anchor design software from Hilti. It supersedes PROFIS Anchor and is available as a Standard version (Free of charge) and a Pr...

How to calculate quantity of resin required to fix reinforcement in concrete. Reinforcement is 12mm diameter,hole diameter 14mm and 325mm embedment